The pulse oximeter PulsiQuant 8040 is an instrument for
setting and measuring the oxygen saturation of arterial blood
(SpO2) with light signals of two different wave lengths. The
instrument also serves to measure pulse rate.
Pulse oximetry is a photometric measurement process which
makes it possible to obtain evidence of a patient´s condition
without using invasive procedures. Long-term measurement,
for example on a sleeping patient, is also possible with this
gentle method. It has alarm settings too.


Technical data:
Classification acc.
to EC directive 93/42/EEC . . I I b
Dimensions (WxHxD) ….……………. 65 x 128 x 27 mm
Weight: ….…………………………… approx. 160 g
Power requirements: ….……………… 9V long-life alkaline battery
or: 7.2 rechargeable NiCd
or: 7.2 rechargeable NiMH
Power consumption: …………………. 100 mW without lighting
150 mW with lighting
Operating time: ….…………………… approx. 24 hours with NiCd rechargeable battery
approx. 30 hours with NiMH rechargeable battery
Measurement process: ………………. Split-Pulse-Wave with Fuzzy
Logic Control
Classification acc. EN 60601-1
– Type of electric shock protection: …. Protection class II
– Level of electric shock protection: …. Type BF
Electro magnetic compatibility (EMC): EN 60601-1-2
– Radio-interference suppression: ……. EN 55011
– Radio-interference resistance: ……… IEC 801 part 2 to 5
SpO2 measurement range:….………. 0 to 99 %
SpO2 accuracy:
with SpO2 above 85 % ……………… ± 1.5 percentage points
with SpO2 between 75 % + 85% …… ± 2.0 percentage points
with SpO2 between 50 % + 75% …… ± 3.0 percentage points
with SpO2 lower than 50 % …………. not specified
Pulse rate: ….………………………… 30 to 250 beats per minute
Pulse rate accuracy: ….……………… ± 1 % bpm
Displays:
LCD with green backlighting
and red alarm LED: ….………………. SpO2, pulse rate, alarm limits, signal quality, heartbeat
symbol, storage, sensor (sensor error), signal (no signal
available), change battery/rechargeable battery
Pulse tone: ….………………………… Variable pitch dependent on the measured oxygen
saturation
Memory: ….………………………….. Data storage for SpO2, pulse rate, and signal quality,
capacity seven hours, data buffer during battery
change (min. 30 minutes)
Data output: ….………………………. with KombiBase 2
Operating temperature: ….………….. - 00 to + 45° C
Storage temperature: ….…………….. - 20 to + 70° C
H u m i d i t y : ….…………………………. - 00 to 90 % (not condensed)